Inovic CRM Engineering

L Block Type Wheel Assembly Specifications

Type: L Block Type Wheel Assembly

Wheel Size: 550 × 500 × 165 mm

Dimensions:

• Outer Diameter (OD): 550 mm

• Track Diameter: 500 mm

• Wheel Width: 165 mm

Material:

• Square Bar / Rail Material: 80Cr Steel

Bearing:

• Bearing Number: 22224 (Spherical Roller Bearing)

Hardness:

• Wheel tread hardness typically 45–50 HRC after heat treatment (if required for heavy duty rail applications).

Typical Application

This type of wheel assembly is commonly used in:

• EOT Cranes

• Gantry Cranes

• Transfer Trolleys

• Rail-mounted material handling systems

Additional Details Usually Required

For full manufacturing or purchase specs, these are also normally specified:

• Axle diameter

• Keyway size

• Hub length

• Bearing housing type

• Heat treatment method (Induction hardened / Through hardened)

• Load capacity

L-Block Type Wheel Assembly – Technical Specification

Wheel Dimensions:

• Diameter: 190 mm
• Width: 160 mm
• Hub Length: 95 mm

Square Bar Size:

• 50 mm × 50 mm

Bearing Details:

• Bearing Number: 22209
• Bearing Make: FAG

Material & Hardness:

• Wheel Material: (Specify material, e.g., EN8 / Cast Iron / PU Coated, etc.)
• Surface Hardness: (Specify, e.g., 50–55 HRC or as required)

Mounting Type:

• L-Block Type Assembly

Warranty:

• 1 Year

Open Type Wheel Assembly ( With Hardening ) 

• Wheel Size (Dia): 200 × 160 × 100 mm

• Square Bar Size: 40 × 40 mm

Bearing Details

• Bearing Number: 6208

• Bearing Make: FAG

If you want, I can also:

• Convert this into drawing / GA note format

• Prepare Indiamart product description

• Add material grade & hardness value wording